|
Truck Shine E is a ready to use Traffic Film Remover with a moisture displacer additive. The product imparts a shine to enhance paintwork and reduces the build up of static, helping to reduce the build up of dust and dirt on paintwork. Water landing on any surface treated will bead off giving the appearance of having just been polished. It is safe to use on all types of paintwork, glass, plastic and rubber surfaces.
Truck Shine E may be applied directly through a pressure washer set at 2% at the nozzle. Fully wet the vehicle paintwork prior to applying the chemical - do not allow to dry on during the cleaning process. Apply from the bottom of the vehicle upwards under low pressure. Wash off with fresh water under pressure.
This product may also be used for hand washing of vehicles. Refer to product COSHH data for suitable PPE when handling this product. Wet the vehicle paintwork prior to application of the product - do not allow to dry on during the cleaning process. Dilute between 50ml - 100ml of Truck Shine E into a bucket of warm water dependent on the degree of soiling. Apply to the surface to be cleaned using a soft brush or sponge. Clean as normal then fully rinse using fresh clean water under low pressure.
Click here to order Truck Shine E
|
