|
|
 |
Truck Wash Caustic Free
|
Truck Wash Caustic Free is a new type of traffic film remover. This is a concentrated TFR that has Very efficient cleansing qualities. It is formulated for use where environmental considerations are a priority - on farms and agricultural locations or near to rivers and sensitive environmental areas. Refer to COSHH data for appropriate PPE when handling this product. The product may be pre dilute as required prior to use for general cleaning of vehicles. When used in conjunction with a pressure washer direct feed use as supplied. Set the dilution at 1%-2% at the nozzle. Fully wet the vehicle paintwork prior to applying the chemical - do not allow to dry on during the cleaning process. Apply from the bottom of the vehicle upwards under low pressure. Wash off with fresh water under pressure. This product may also be used for hand washing of vehicles. Wet the vehicle paintwork prior to application of the product - do not allow to dry on during the cleaning process. Dilute 75ml of Truck Wash Caustic Free into a bucket of warm water dependent on the degree of soiling. Apply to the surface to be cleaned using a soft brush or sponge. Clean as normal then fully rinse using fresh clean water under low pressure.
Click here to order Truck Wash Caustic Free
|
|
|
|
|
|
