|
Truck Wash E is a ready to use general purpose Traffic Film Remover and cleaner for use on vehicles, bodies, chassis and machinery. The product is free rinsing and economic in use. It is safe to use on all types of paintwork, glass, plastic and rubber surfaces. Refer to COSHH data for appropriate PPE when handling this product. Dilute at 40:1, wet area prior to cleaning. Leave on a few minutes then rinse off at high pressure.
Truck Wash E may also be applied directly through a pressure washer set at 2% at the nozzle. Fully wet the vehicle paintwork prior to applying the chemical - do not allow to dry on during the cleaning process. Apply from the bottom of the vehicle upwards under low pressure. Wash off with fresh water under pressure.
This product may also be used for hand washing of vehicles. Wet the vehicle paintwork prior to application of the product - do not allow to dry on during the cleaning process. Dilute 100ml of Truck Wash E into a bucket of warm water. Apply to the surface to be cleaned using a soft brush or sponge. Clean as normal then fully rinse using fresh clean water under low pressure. This product is suitable for use in conjunction with barrel feed systems and is suitable for use in forecourt coin operated pressure wash systems.
Click here to order Truck Wash E
|
